CABLES TO GO 03574-External SCSI-1 C50M Active Terminator

CABLES TO GO 03574-External SCSI-1 C50M Active Terminator



Salient features:

EXTERNAL SCSI-1 C50M ACTIVE TERMINATOR

Features:

For external SCSI-1 end-of-line termination.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. A passive terminator is simply a resistor network designed to regulate the impedance in the line, while an active terminator uses a voltage regulator to optimize signal voltage. Active termination is always preferred over passive, and most WorldofCables Active Terminators feature an LED to monitor terminator power line status. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a WorldofCables Terminator!
# Connector: SCSI-1 Centronics 50-pin
# Termination: Active
# Designed For: For external SCSI-1 end-of-line termination

Specifications:

Warranty: Lifetime
Color: Grey
Mfr: WorldofCables
Weight: 0.15lbs

CABLES TO GO 02918-RJ12/DB25M Modular Adapter Beige

CABLES TO GO 02918-RJ12/DB25M Modular Adapter Beige



Salient features:

RJ12/DB25M MODULAR ADAPTER BEIGE

For serial printers, terminals, modems, POS and other serial equipment

Features:

Using modular adapters with inexpensive silver satin or flat oval twisted pair wire has become a popular way to run client server applications. Needing to connect dumb terminals on the desktop back to a central patch panel or directly to a MUX via RS232, many network planners have implemented modular adapters as the most cost effective way to complete the connections.
Whether used in a wiring closet or throughout the office, color-coded modular adapters lend easy identification and differentiation to your cable plan. By color coding your connections, you cut down on troubleshooting time while taking full advantage of the benefits of this modular adapter approach. These modular adapters are priced as unconfigured kits. We are more than happy to configure any adapter to fit your application so that they are ready to use upon arrival. Just give us a call and we'll do the rest!

Specifications:

* Color: Beige
* Weight: 0.06lbs

CABLES TO GO 28292-6ft LVD/SE VHDCI.8mm 68M/M Cable with Ferrites

CABLES TO GO 28292-6ft LVD/SE VHDCI.8mm 68M/M Cable with Ferrites



Salient features:

Double-shielded Ultra2/Ultra3 LVD/SE external VHDCI cable; .8mm connector and ferrites
Features:

VHDCI (Very High-Density Cable Interconnect) SCSI Cables feature 28AWG double-shielded twisted-pair cabling, ferrites and .8mm 68-pin molded connectors to reduce EMI/RFI interference. These cables are designed to meet or exceed SCSI specifications. This cable is primarily used to connect advanced SCSI multiport applications to RAID controllers. VHDCI cables are built with the offset connector so that they may be utilized in stacking environments. The small footprint allows up to four channels to be connected on a single card, and offers excellent shielding against data loss. By creating this improved physical interconnect, connectivity is both more versatile and manageable. VHDCI is also referred to as SCSI-V.

* Connectors: External Very High-Density .8mm 68-pin Male to External Very High-Density .8mm 68-pin Male
* Twisted-pair conductors ensure that each data line is paired with a ground line to minimize interference
* Foil and braid shielding with 360deg soldering and ferrite cores with contact directly to the shield for maximum effectiveness in reducing EMI/RFI ensuring error-free data transfer
* Provides for a longer possible cabling distance (up to 25 meters) by using Low Voltage Differential (LVD) signaling
* Get maximum data transfer rates up to 320 MBps
* Designed for: Connects advanced SCSI multiport applications to RAID controllers

Specifications:

* Color: Beige
* Size: 6ft
* Weight: 1lbs