CABLES TO GO 28152-6ft LVD/SE VHDCI.8mm 68M to SCSI-1 C50M Cable with Ferrites

CABLES TO GO 28152-6ft LVD/SE VHDCI.8mm 68M to SCSI-1 C50M Cable with Ferrites

salient features:


Double-shielded LVD/SE external VHDCI cable with ferrites; .8mm 68-pin to SCSI-1 CN50-pin

Features:

VHDCI (Very High-Density Cable Interconnect)SCSI Cables feature 28AWG double-shielded twisted-pair cabling, ferrites and .8mm 68-pin molded connectors to reduce EMI/RFI interference. These cables are designed to meet or exceed SCSI specifications. This cable is primarily used to connect advanced SCSI multiport applications to RAID controllers. VHDCI cables are built with the offset connector so that they may be utilized in stacking environments. The small footprint allows up to four channels to be connected on a single card, and offers excellent shielding against data loss. By creating this improved physical interconnect, connectivity is both more versatile and manageable. VHDCI cables are also referred to as SCSI-V cables.

* Connectors: External Very High-Density .8mm 68-pin Male to External Centronis 50-pin Male
* Twisted-pair conductors ensure that each data line is paired with a ground line to minimize interference
* Foil and braid shielding with 360deg soldering and ferrite cores with contact directly to the shield for maximum effectiveness in reducing EMI/RFI ensuring error-free data transfer
* Provides for a longer possible cabling distance (up to 25 meters) by using Low Voltage Differential (LVD) signaling
* Get maximum data transfer rates up to 320 MBps
* Designed for: Connects advanced SCSI multiport applications to RAID controllers

Specifications:

* Color: Beige
* Size: 6ft
* Weight: 1lbs

Buy More Cables at worldofcables store Call Toll Free Now-1-877-230-2198

CABLES TO GO 09512-External SCSI-3 MD68M (TS) Active Negation Terminator with LED

CABLES TO GO 09512-External SCSI-3 MD68M (TS) Active Negation Terminator with LED


salient features:

EXTERNAL SCSI-3 MD68M (TS) ACTIVE NEGATION TERMINATOR WITH LED

Features:

External SCSI-3 end-of-line terminator with 1% tolerance voltage regualation.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. A passive terminator is simply a resistor network designed to regulate the impedance in the line, while an active terminator uses a voltage regulator to optimize signal voltage. Active termination is always preferred over passive, and most WorldofCables Active Terminators feature an LED to monitor terminator power line status. Active negation terminators differ from active terminators in that voltage regulation is provided within a 1% tolerance, and current sinking capability of 20mA is added, creating a much more stable SCSI bus. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a WorldofCables Terminator!
# Connector: SCSI-3 High-Density 68-pin Male with Thumbscrews
# Termination: Active Negation with LED
# Designed For: For external SCSI-3 end-of-line termination
# Voltage regulation is provided within a 1% tolerance, creating a much more stable SCSI bus

Specifications:

Warranty: Lifetime
Color: Beige
Mfr: WorldofCables
Weight: 0.12lbs

Buy More Cables at worldofcables store Call Toll Free Now-1-877-230-2198

CABLES TO GO 09512-External SCSI-3 MD68M (TS) Active Negation Terminator with LED

CABLES TO GO 09512-External SCSI-3 MD68M (TS) Active Negation Terminator with LED


salient features:

EXTERNAL SCSI-3 MD68M (TS) ACTIVE NEGATION TERMINATOR WITH LED

Features:

External SCSI-3 end-of-line terminator with 1% tolerance voltage regualation.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. A passive terminator is simply a resistor network designed to regulate the impedance in the line, while an active terminator uses a voltage regulator to optimize signal voltage. Active termination is always preferred over passive, and most WorldofCables Active Terminators feature an LED to monitor terminator power line status. Active negation terminators differ from active terminators in that voltage regulation is provided within a 1% tolerance, and current sinking capability of 20mA is added, creating a much more stable SCSI bus. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a WorldofCables Terminator!
# Connector: SCSI-3 High-Density 68-pin Male with Thumbscrews
# Termination: Active Negation with LED
# Designed For: For external SCSI-3 end-of-line termination
# Voltage regulation is provided within a 1% tolerance, creating a much more stable SCSI bus

Specifications:

Warranty: Lifetime
Color: Beige
Mfr: WorldofCables
Weight: 0.12lbs



Buy More Cables at worldofcables store Call Toll Free Now-1-877-230-2198

CABLES TO GO 09512-External SCSI-3 MD68M (TS) Active Negation Terminator with LED

CABLES TO GO 09512-External SCSI-3 MD68M (TS) Active Negation Terminator with LED




EXTERNAL SCSI-3 MD68M (TS) ACTIVE NEGATION TERMINATOR WITH LED

Features:

External SCSI-3 end-of-line terminator with 1% tolerance voltage regualation.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. A passive terminator is simply a resistor network designed to regulate the impedance in the line, while an active terminator uses a voltage regulator to optimize signal voltage. Active termination is always preferred over passive, and most WorldofCables Active Terminators feature an LED to monitor terminator power line status. Active negation terminators differ from active terminators in that voltage regulation is provided within a 1% tolerance, and current sinking capability of 20mA is added, creating a much more stable SCSI bus. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a WorldofCables Terminator!
# Connector: SCSI-3 High-Density 68-pin Male with Thumbscrews
# Termination: Active Negation with LED
# Designed For: For external SCSI-3 end-of-line termination
# Voltage regulation is provided within a 1% tolerance, creating a much more stable SCSI bus

Specifications:

Warranty: Lifetime
Color: Beige
Mfr: WorldofCables
Weight: 0.12lbs


Buy More Cables at worldofcables store Call Toll Free Now-1-877-230-2198

CABLES TO GO 28293-1.5ft LVD/SE VHDCI.8mm 68M to SCSI-3 MD68M Cable with Ferrites Item# 28293

CABLES TO GO 28293-1.5ft LVD/SE VHDCI.8mm 68M to SCSI-3 MD68M Cable with Ferrites Item# 28293
Product Description
Double-shielded LVD/SE external VHDCI cable with ferrites; .8mm 68-pin to SCSI-3 MD68-pin

Features:
VHDCI (Very High-Density Cable Interconnect)SCSI Cables feature 28AWG double-shielded twisted-pair cabling, ferrites and .8mm 68-pin molded connectors to reduce EMI/RFI interference. These cables are designed to meet or exceed SCSI specifications. This cable is primarily used to connect advanced SCSI multiport applications to RAID controllers. VHDCI cables are built with the offset connector so that they may be utilized in stacking environments. The small footprint allows up to four channels to be connected on a single card, and offers excellent shielding against data loss. By creating this improved physical interconnect, connectivity is both more versatile and manageable. VHDCI cables are also referred to as SCSI-V cables.

Connectors: External Very High-Density .8mm 68-pin Male to External Micro-Density 68-pin Male
Twisted-pair conductors ensure that each data line is paired with a ground line to minimize interference
Foil and braid shielding with 360deg soldering and ferrite cores with contact directly to the shield for maximum effectiveness in reducing EMI/RFI ensuring error-free data transfer
Provides for a longer possible cabling distance (up to 25 meters) by using Low Voltage Differential (LVD) signaling
Get maximum data transfer rates up to 320 MBps
Designed for: Connects advanced SCSI multiport applications to RAID controllers
Specifications:

Color: Beige
Size: 1.5ft
Weight: 1lbs

Buy More Cables at worldofcables.com