CABLES TO GO EXTERNAL SCSI-1 C50M ACTIVE TERMINATOR

CABLES TO GO EXTERNAL SCSI-1 C50M ACTIVE TERMINATOR

Product Description

EXTERNAL SCSI-1 C50M ACTIVE TERMINATOR

Features:

For external SCSI-1 end-of-line termination.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. A passive terminator is simply a resistor network designed to regulate the impedance in the line, while an active terminator uses a voltage regulator to optimize signal voltage. Active termination is always preferred over passive, and most Worldofcables Active Terminators feature an LED to monitor terminator power line status. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a Worldofcables Terminator!

Connector: SCSI-1 Centronics 50-pin

Termination: Active

Designed For: For external SCSI-1 end-of-line termination

Specifications:

Warranty:  Lifetime
Color:  Grey
Mfr:  Worldofcables
Weight:  0.15lbs

Buy More Cables at www.worldofcables.biz

                     

CABLES TO GO EXTERNAL SCSI-1 C50M ACTIVE TERMINATOR

CABLES TO GO EXTERNAL SCSI-1 C50M ACTIVE TERMINATOR


Product Description
EXTERNAL SCSI-1 C50M ACTIVE TERMINATOR

Features:

For external SCSI-1 end-of-line termination.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. A passive terminator is simply a resistor network designed to regulate the impedance in the line, while an active terminator uses a voltage regulator to optimize signal voltage. Active termination is always preferred over passive, and most Worldofcables Active Terminators feature an LED to monitor terminator power line status. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a Worldofcables Terminator!

Connector: SCSI-1 Centronics 50-pin
Termination: Active
Designed For: For external SCSI-1 end-of-line termination
Specifications:

Warranty: Lifetime
Color: Grey
Mfr: Worldofcables
Weight: 0.15lbs
Buy More Cables at www.worldofcables.biz

CABLES TO GO EXTERNAL SCSI-I C50F TO SCSI-2 MD50M ADAPTER

CABLES TO GO EXTERNAL SCSI-I C50F TO SCSI-2 MD50M ADAPTER

Product Description
EXTERNAL SCSI-I C50F TO SCSI-2 MD50M ADAPTER
Features:
Converts a SCSI-1 Centronics 50-pin male to a SCSI-2 Micro-Density 50-pin male
With SCSI Adapters from Worldofcables, you can save the time and expense of buying new cables by simply adapting your existing ones to interface with the connector types found on many of the newer model SCSI peripherals. We carry a wide variety of adapters to make the conversion between your older SCSI or fast SCSI cable and the new high density SCSI connectors seamless. With the external SCSI-2 to SCSI-1 adapter, easily adapt an external SCSI-2 micro-density 50-pin connection to a SCSI-1 centronics 50-pin connection.

Connectors: External SCSI-2 Micro-Density 50 Male with Latch Blocks to External SCSI-I Centronics 50-pin Female
Use: Connect a SCSI-1 Centronics 50-pin Male cable to a SCSI-2 Micro-Density 50-pin female port
Specifications:

Warranty: Lifetime
Color: Charcoal
Mfr: Worldofcables
Weight: 0.12lbs

Buy More Cables at www.worldofcables.biz

CABLES TO GO EXTERNAL SCSI-3 MD68M (TS) ACTIVE NEGATION TERMINATOR WITH LED

CABLES TO GO EXTERNAL SCSI-3 MD68M (TS) ACTIVE NEGATION TERMINATOR WITH LED


Product Description

Features:

External SCSI-3 end-of-line terminator with 1% tolerance voltage regualation.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. A passive terminator is simply a resistor network designed to regulate the impedance in the line, while an active terminator uses a voltage regulator to optimize signal voltage. Active termination is always preferred over passive, and most Worldofcables Active Terminators feature an LED to monitor terminator power line status. Active negation terminators differ from active terminators in that voltage regulation is provided within a 1% tolerance, and current sinking capability of 20mA is added, creating a much more stable SCSI bus. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a Worldofcables Terminator!

Connector: SCSI-3 High-Density 68-pin Male with Thumbscrews
Termination: Active Negation with LED
Designed For: For external SCSI-3 end-of-line termination
Voltage regulation is provided within a 1% tolerance, creating a much more stable SCSI bus
Specifications:

Warranty: Lifetime
Color: Beige
Mfr: Worldofcables
Weight:

Buy More Cables at www.worldofcables.biz

CABLES TO GO 6ft 8 PIN MINI-DIN M/F SERIAL EXTENSION CABLE

CABLES TO GO 6ft 8 PIN MINI-DIN M/F SERIAL EXTENSION CABLE

Product Description

Features:
Connects your Apple?or Mac?computers to compatible peripherals. World of Cables offers you an assortment of lengths to choose from allowing quick and easy configuration of computer and peripheralsin your work environment. Each extension comes molded and fully shielded to provide you with a more durable connection while preventing any unwanted EMI/RFI interference caused by office lighting, telephones, etc. Choose between male-to female cables used for extending your computer equipment or the male-to-male connections used as replacement cables.

Specifications:

Size: 6ft
Weight: 0.18lbs

Buy More Cables at www.worldofcables.biz

CABLES TO GO EXTERNAL SCSI ULTRA160 MD68M LVD/SE TERMINATOR

CABLES TO GO EXTERNAL SCSI ULTRA160 MD68M LVD/SE TERMINATOR


Product Description:
EXTERNAL SCSI ULTRA160 MD68M LVD/SE TERMINATOR
Features:
For external low voltage differential or single-ended SCSI Ultra160 end-of-line termination.
We offer a wide variety of SCSI Terminators to optimize the performance of your SCSI bus - from the popular passive and active terminators for single-ended SCSI applications, to the active negation and hard-to-find, premium-quality forced perfect terminators. Picking the right terminator is vital to the performance of your SCSI chain. LVD/SE terminators supports both the new LVD (Low voltage differential) specification as backwards compatibility to SCSI, SCSI-2, and SPI single-ended specifications. Multimode compatibility permits the use of legacy devices on the bus without hardware alterations. For LVD termination, the terminator integrates two regulated supplies with nine precision resistor strings. For SE termination, one regulator and nine precision 110ohm resistors are used. Automatic mode selection is achieved through voltage detection on the diffsense line. Before you can connect your expensive SCSI equipment, make sure you make the right connection with a Worldofcables Terminator!
Connector: Ultra2 Micro-Density 68-pin Male with Thumbscrews
Termination: LVD/SE
Designed For: For external low voltage differential or single-ended SCSI Ultra2 end-of-line termination
Specifications:
Warranty: Lifetime
Color: Black
Mfr: Worldofcables
Weight: 0.13lbs

Buy More Cables at www.worldofcables.biz

CABLES TO GO 6ft LVD/SE VHDCI.8mm 68M TO SCSI-2 MD50M CABLE with FERRITES

CABLES TO GO 6ft LVD/SE VHDCI.8mm 68M TO SCSI-2 MD50M CABLE with FERRITES

Product Description
Double-shielded LVD/SE external VHDCI cable with ferrites; .8mm 68-pin to SCSI-2 MD50-pin

Features:
VHDCI (Very High-Density Cable Interconnect)SCSI Cables feature 28AWG double-shielded twisted-pair cabling, ferrites and .8mm 68-pin molded connectors to reduce EMI/RFI interference. These cables are designed to meet or exceed SCSI specifications. This cable is primarily used to connect advanced SCSI multiport applications to RAID controllers. VHDCI cables are built with the offset connector so that they may be utilized in stacking environments. The small footprint allows up to four channels to be connected on a single card, and offers excellent shielding against data loss. By creating this improved physical interconnect, connectivity is both more versatile and manageable. VHDCI cables are also referred to as SCSI-V cables.

Connectors: External Very High-Density .8mm 68-pin Male to External Micro-Density 50-pin Male
Twisted-pair conductors ensure that each data line is paired with a ground line to minimize interference
Foil and braid shielding with 360deg soldering and ferrite cores with contact directly to the shield for maximum effectiveness in reducing EMI/RFI ensuring error-free data transfer
Provides for a longer possible cabling distance (up to 25 meters) by using Low Voltage Differential (LVD) signaling
Get maximum data transfer rates up to 320 MBps
Designed for: Connects advanced SCSI multiport applications to RAID controllers
Specifications:

Color: Beige
Size: 6ft
Weight: 1lbs

Buy More Cables at www.worldofcables.biz

CABLES TO GO 6ft LVD/SE VHDCI.8mm 68M TO SCSI-2 MD50M CABLE with FERRITES

CABLES TO GO 6ft LVD/SE VHDCI.8mm 68M TO SCSI-2 MD50M CABLE with FERRITES
Product Description
Double-shielded LVD/SE external VHDCI cable with ferrites; .8mm 68-pin to SCSI-2 MD50-pin

Features:
VHDCI (Very High-Density Cable Interconnect)SCSI Cables feature 28AWG double-shielded twisted-pair cabling, ferrites and .8mm 68-pin molded connectors to reduce EMI/RFI interference. These cables are designed to meet or exceed SCSI specifications. This cable is primarily used to connect advanced SCSI multiport applications to RAID controllers. VHDCI cables are built with the offset connector so that they may be utilized in stacking environments. The small footprint allows up to four channels to be connected on a single card, and offers excellent shielding against data loss. By creating this improved physical interconnect, connectivity is both more versatile and manageable. VHDCI cables are also referred to as SCSI-V cables.

Connectors: External Very High-Density .8mm 68-pin Male to External Micro-Density 50-pin Male
Twisted-pair conductors ensure that each data line is paired with a ground line to minimize interference
Foil and braid shielding with 360deg soldering and ferrite cores with contact directly to the shield for maximum effectiveness in reducing EMI/RFI ensuring error-free data transfer
Provides for a longer possible cabling distance (up to 25 meters) by using Low Voltage Differential (LVD) signaling
Get maximum data transfer rates up to 320 MBps
Designed for: Connects advanced SCSI multiport applications to RAID controllers
Specifications:

Color: Beige
Size: 6ft
Weight: 1lbs

Buy More Cables at www.worldofcables.biz